Description of the measuring amplifier menu
Menu entry Level
1
Menu entry Level 2
Menu entry Level 3
Sensor config.
➔
unit
➔
Sensor capacity
➔
Rated output
Select unit
Numeric setting of the physical nominal value of
the sensor.
Numeric setting of the electrical characteristic
value of the sensor.²
Strain analysis
➔
Set gage factor
➔
Set bridge type
➔
Numeric setting of the K-factor between 0.2
and 258
➔
Full bridge: Full bridge circuit with 4 individual
DMS, all in longitudinal direction³
➔
Half bridge: Half bridge circuit with 2 individual
DMS, both in longitudinal direction³
➔
Quarter bridge: Quarter bridge circuit with one
DMS³
➔
PR.full bridge: Full bridge circuit with 4
individual DMS, 2 in longitudinal direction and 2
in cross direction³
➔
PR.half bridge: Half bridge circuit with 2
individual DMS, one in longitudinal direction and
one in cross direction³
Menu entry Level 4
Poissons ratio(only with selection of cross-
direction full bridge or cross-direction half bridge
in Level 3) Numerical value from 0 to 0.5.³
Load settings
➔
default: Manufacturer’s
settings i.e. restoring
GSV-2 parameters to
default settings.
➔
user 1: User-
configurable data set
no.1 i.e. loading the
parameters that were
1 Changing the unit does not change the measured value scaling!
2 Modification of the sensor measurement range or the characteristic value changes the scaling of the
measured value.
3 Modification of the DMS parameter of the strain analysis changes the scaling of the measured value and
the unit.
ME-Meßsysteme GmbH
Neuendorfstr. 18a
Tel.: +49 3302 78620 60
Mail: [email protected]
16761 Hennigsdorf
Fax: +49 3302 78620 69
Web: www.me-systeme.de
7
