Description of the buttons
Button
Function
MODE
To switch on and off or access the Logger menu
MENU
(LEFT)
To access the measuring amplifier menu, to go one menu level higher or to cancel an
entry.
For numeric settings: to move the cursor left.
UP
To move around the menu within the same level: switching to the next entry.
For measured value mode=MaxMin: to switch from one measured value display to
the next one up.
For numeric settings: to increase number and/or setting above the cursor.
DOWN
To move around the menu within the same level: switching to the previous entry.
For measured value mode=MaxMin: To switch from one measured value display to
the next one down.
For numeric settings: to decrease number and/or setting above the cursor.
OK
(RIGHT)
To confirm the entry or move down one level.
For measured value display and recording mode “withOK”: to record measured values
to file.
For numeric settings: to move the cursor right.
SHORT
To connect the +Ud and -Ud inputs (short-circuit of sensor signal)
ZERO
To trigger an automatic zero adjustment.
Number setting
To set a numerical value and the date or time, move the cursor right by pressing OK and left
by pressing MENU. The digit (and/or the month) above the cursor flashes and can be
increased or decreased using the UP / DOWN buttons.
For the setting to take effect, the OK button must be held down until the whole number
flashes.
Then release the OK button, and the following message will appear “OK to confirm“.
Confirm this by pressing OK. To cancel the numeric setting, hold down the MENU button.
ME-Meßsysteme GmbH
Neuendorfstr. 18a
Tel.: +49 3302 78620 60
Mail: [email protected]
16761 Hennigsdorf
Fax: +49 3302 78620 69
Web: www.me-systeme.de
10
