Me GSV-2MSD-DI, Instruction Manual

Page: 21 / 26

Technical data
(in battery operation or U
B
= 8…26V DC in the nominal temperature range)
Size Value Unit
Accuracy class
Analogue
Digital 0,1
0,05 %
%
Inputs
Measurement range ±1 (JP1 on 1 with 5V sensor supply)
±2 or ±3.5 per software
(JP1 on 2 with 2,5V sensor supply) mV/V
mV/V
Connectible full bridge 4 x 350 Ohm
Bridge supply voltage 2,5 / 5 V
Input impedance >20 (300pF) MOhm
Common mode rejection
DC
100Hz
>120
>100 dB
dB
Analogue input 1)
Input voltage range
Input resistance 0…10
56 V
kOhm
Accuracy
Linearity deviation <0,02 % of unit
Influence of temperature on
the zero point per 10K
Measurement range 1mV/V: <0.4 type 0.2
Measurement range 2mV/V: <0.2 type 0.1
% of unit
% of unit
Influence of temperature on
the measurement sensitivity
per 10K referring to the
measured value
Analogue output
Display / digital
< 0,1; type. 0,05
<0,01; type. 0,005
%
%
Resolution Peak value
RMS
>30000 parts
>150000 parts
Output
Analogue output filter
-3dB cut-off frequency, Bessel,
2. order
Digital output filter
- 3dB cut-off frequency
Digital output measuring
rate
3.5; 260; 1700 (can be switched using software)
0.06..1700
0..3750
Hz
Hz
Hz
Analogue output
Source resistance
-5...+5
47 V
Ohm
Control cables High level: 3.4 (active high)
ME-Meßsysteme GmbH
Neuendorfstr. 18a
Tel.: +49 3302 78620 60 Mail: info@me-systeme.de
16761 Hennigsdorf Fax: +49 3302 78620 69 Web: www.me-systeme.de 21