MDT Technologies SCN-WS3HW.01, Technical Manual

Page: 12 / 37

Technisches Manual Weather station SCN ‐ WS3HW.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
12
4.2 Brightness sensors
The brightness sensors for East, South and West have the same functions, but every sensor can be
parameterized indivivually.
The following illustration shows the settings for the brightness sensors:
Illustration 4: Brightness sensor
Die nachfolgende Tabelle zeigt die Einstellmöglichkeiten für die Helligkeitssensoren:
ETS ‐ Text Dynamic range
[default value]
Comment
Send brightness values [Lux]

never

on demand

at change

cyclic

at change and cyclic
defines the sending condition for the
brightness values
Send by change of

10%

20%

30%
If the brightness value shall be sent
at change, the rate of change can be
defined at thisparameter.
Time for cyclic
sending
10 sec, 20 sec, 30 sec, 1 min, 2
min, 5 min , 10 min, 20 min, 30
min, 45 min, 60 min
If the brightness value shall be sent
cyclic, the time for cyclic sending can
be defined at this parameter.
Treshold value 1

not active

active
activates the first threshold value
Treshold value 2

not active

active
activates the second threshold value
only available if the first threshold
value is active
Facade control
East/South/West

not active

active
activates the facade control
only available if the first threshold
value is active
Chart 4: Settings brightness sensor