Technical Manual IP-Router SCN-IP100.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
12
Group telegrams (main groups 0 to 13):
Block:
No group telegrams of these main groups are routed to KNX/EIB.
Route:
All group telegrams of this main group are routed to KNX/EIBG independent of the
filter table. This setting is used for testing purposes only.
Filter:
The filter table is used to check whether the received group telegram should be
routed to KNX/EIB.
Group telegrams (main groups 14 and 15):
Block:
No group telegrams of main groups 14 and 15 are routed to KNX/EIB.
Route:
All group telegrams of the main groups 14 and 15 are routed to KNX/EIB.
Group telegrams (main groups 16 to 31):
Block:
No group telegrams of these main groups are routed to KNX/EIB.
Route:
An additional page appears on which the routing of main groups 16 to 31 can be
disabled or enabled in pairs.
Physically addressed telegrams:
Block:
No physically addressed telegrams are routed to KNX/EIB.
Route:
All physically addressed telegrams are routed to KNX/EIB.
Filter:
The physical address is used to check whether the received physically ad-dressed
telegram should be routed to KNX/EIB.
Broadcast telegrams:
Block:
No received broadcast telegrams are routed to KNX/EIB.
Route:
All received broadcast telegrams are routed to KNX/EIB.
Resending of group telegrams:
Disable
:
The received group telegram is not re-sent to KNX/EIB in case of a fault.
Enable:
The received group telegram is resent up to three times in case of a fault.
Resending of physically addressed telegrams:
Disable:
The received physically addressed tele-gram is not resent to KNX/EIB in case of a
fault.
Enable:
The received physically addressed tele-gram is resent up to three times in case of a
fault.
Resending of broadcast telegrams:
Disable:
The received broadcast telegram is not resent to KNX/EIB in case of a fault.
Enable:
The received broadcast telegram is re-sent up to three times in case of a fault.
