Technisches Handbuch Bewegungsmelder SCN-BWM55.x1
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
27
27
4.2.6 External Push Button Input
The following figure shows the settings for the external push-button input:
Figure 9: Settings - External push button input
The following table shows the possible settings for these parameters:
ETS-Text
Dynamic range
[default value]
Comment
External push button
input reacts to
only ON
ON and OFF
Selection whether the external push-
button input can switch the light
channel only ON or ON and OFF.
Table 12: Setting - External push button input
With the external push-button input, the motion detector can be switched on independently of
movement detection..
The object for the "external push-button short" switches the motion detector to the next state (see
also 4.2.7 Process Diagram).
In contrast, the object "External push button long" always switches the motion detector directly On
or Off.
The following table shows the general communication objects:
Number
Name
Length
Usage
3
Light channel 1
–
Input
–
External push button short
1 Bit
Object for the output of an external push-button;
is used for manual switching between the states
of the light channel or for switching on the light
channel in the half-automatic mode.
4
Light channel 1
–
Input
–
External push button long
1 Bit
Object for the output of an external push-button;
is used for manual switching on of the light
channel
Table 13: Communication objects - External push button input
