Opera 240 System Manual
Page 30
3.7. Programming the Trunk Access digits
The trunk line access digits are dialled by a user to make a call on an external trunk. In addition
to the default trunk line access code, nineteen other codes may be allocated to the various
external lines using the table below.
Trunk Access Codes
In the example shown below, T1 to0 T4 are ISDN2 Basic Rate Accesses and IP13 to IP22 are
SIP trunks.
Dialling the digit 0 will select any trunk line.
Dialling *91 will select the ISDN2 basic access T1.
Dialling *92 will select the ISDN2 basic access T2.
Dialling *93 will select the ISDN2 basic access T3.
Dialling *94 will select the ISDN2 basic access T4.
Dialling *95 will select the SIP trunk IP13.
Dialling *96 will select the SIP trunk IP14.
Dialling *97 will select the SIP trunk IP15.
Dialling *98 will select any of the ISDN2 basic accesses, T1 to T4.
Click on the digit 2 at the bottom right hand side of the blue area for the second sheet, with 11
further codes boxes.
Summary of Contents for Opera 240
Page 1: ...Opera 240 System Manual...
