MDS Opera 240, System Manual, Page: 16 / 86

Opera 240 System Manual
Page 16
Is Universal
Plug n Play
enabled on your
Router?
Browse to the Router’s Programming web page
and program port forwarding, so that the following
packets are forwarded to the IP address of the
system.
TCP packets arriving on port (5075)
UDP packets arriving on ports (50000-50480)
TCP packets arriving on port (7000) forwarded to
port (80).
Manually Forward VoIP ports on the Router to the
internal IP address of the system
Just take the IP system phone home and connect it to you home
LAN. The IP system phone will request an IP address from the
DHCP server in your router. (
Note : If DHCP is not enabled in the
router, you will need to manually set the local IP address in the
Phone: depress Menus key for 10 seconds, then scroll to Local IP
Params/Change IP Address.) Once it has a Local IP address, the
phone will then connect back to the system over the Internet.
STEP 3. If you wish to use your IP system phone at a remote
location
The IP system phones request an IP address from the DHCP
server in the router. (
Note : If DHCP is not enabled in the
router, you need to manually set the local IP address in each
Phone; see phone installation guide for this).
The phone then
Auto-discovers the system and is assigned
an IP registration name and an IP registration PIN along with
the WAN (public) IP address of the router.
That’s it. Your IP system phone should now be
connected to the Opera system and be able to make and
receive calls
STEP 2. Connect the IP system phones to the LAN
Yes
No