Page 48 of 53
SK2017 AHRI PFWSL-V/P-AECM-001
PARAMETER SETTING:
Parameter A:
When thermostat is closed, press“
” and “
” buttons simultaneously and hold for 3 seconds.
1.
The thermostat will display “00 or 01”
，
use “
△
” or “
▽
” key to adjust
。
2.
Press “ ” to enter next parameter setting, Press “
△
” or “
▽
” key to adjust
。
3.
Repeat the second step above to set other parameter.
No.
Parameter
Default
Function
1
( the”
” icon will be showed)
00
00
When the window is open, the dry contact (C1 and Com) is close.
01
When the window is open, the dry contact (C1 and Com) is open.
2
( the”
” icon will be showed)
01
01
Internal sensor and external sensor available, the external sensor is
used to test the water temperature
02
External sensor is used to measure the room temperature. When
external sensor is connected, thermostat works on external sensor
mode. If external sensor is not connected it will function on the
internal sensor.
3
( the”
” icon will be showed)
01--32
01
Communication address
Parameter B:
When thermostat is closed, press “ ” button and hold for 10 seconds.
1. The thermostat will display “02 or 04”
，
use “
△
” or “
▽
” key to adjust
。
2. Press “ ” to enter next parameter setting, Press “
△
” or “
▽
” key to adjust
。
3. Repeat the second step above to set other parameter.
No.
Parameter
Default
Function
1
( the”
” icon will be showed)
02
2 pipe configuration
04
4 pipe configuration
2
( the”
” icon will be showed)
dA
Type DA: With continuous fan cycle
db
Type DB: With stop fan cycle
3
( the”
” icon will be showed)
00
00
Manual
01
Auto changeover
G.4.
Remote handset for Thermostat in W Type Control
STCD-A01 IR handset
Battery spec:
2*AAA batteries
Casing dimension:
45*115*25mm (W*H*D)
Casing material:
Fire retardant PC ABS
IP protection:
IP30 according to EN60529
Indication:
LCD display
Control Parameters:
ON/OFF
TEMP +/-
Fan speed
Mode selection
Sleep ON/OFF