MDC FORBES 15+ 2021 Owner'S Manual Download Page 60

Page: 60 / 87

www.marketdirect.com.au

Ph: 1300 494 494

500 KM FIRST SERVICE

CHECKED

Hitch

• Check hitch bolts to

90Nm

• Lubricate with high temp bearing grease.

Handbrake

• Inspect and adjust handbrake.

Brakes & Bearings

• Inspect and adjust brakes. Check bearings are well greased and

crown nut is correctly tightened.

Wheel nuts

• Inspect condition and torque to 125Nm (12mm studs)

(140Nm 14mm studs alloy rims) (200Nm 14mm studs steel rims).

Tyres

• Inspect for abnormal wear, damage, and pressure.

General fixings

• Ensure no loose fittings.

Seals & Latches

• Check all seals on doors and hatches compress 30-50%.

All seals in serviceable condition and free of damage.

Suspension

• Grease bushes and check for play.
• Check torque on suspension hanger bolts (190nm).
• Check retaining chain shackles tight.

Service Centre:

Notes:

Service Record

Summary of Contents for FORBES 15+ 2021
























































































Search results

Summary of Contents for FORBES 15+ 2021

Reviews:

Brands by name

Popular brands

MDC FORBES 15+ 2021, Owner'S Manual

Search results

Summary of Contents for FORBES 15+ 2021

Reviews:

Brands by name

Popular brands