MDC FORBES 15+ 2021, Owner'S Manual

Page: 35 / 87

www.marketdirect.com.au
Ph: 1300 494 494
31
Mirrors
Do not use solvents or chemicals when cleaning mirrors. Warm water and a soft clean cloth are the best method.
Cleaners and solvents may affect the reflective backing causing what’s known as “creep” where the edges of the
mirror discolour.
Galvanised Finishes
Your galvanised chassis will need maintenance when used off road. The zinc coating although being tough is still
susceptible to damage from stones chips to the coating should be maintained using a zinc rich coating.
High Tensile Bolt and Fittings
Zinc plated bolts and fittings should be coated with a protectant such as a lanolin based spray. The proprietary item
“Lanotec” is recommended.
Stainless Steel
Do not use abrasive cleaners on stainless steel. Purpose made stainless steel cleaners are recommended as are
solutions such as 10% white vinegar in water.
Fabrics
Fabrics may not be colourfast and should be washed gently by hand on their own or dry cleaned.
Corrosion Protection
Reasonable steps should be made by the customer to protect the product from corrosion. Seaside areas, areas with
high salt contents in soil and roads that are salted during snow conditions can greatly accelerate corrosion. When
used in these areas the product should be thoroughly washed after use and unpainted metal surfaces should be
coated in a suitable protectant. Lanotec lanolin spray, Inox or similar are recommended.
Paint coatings should be regularly waxed to protect against oxidisation in these areas.
Roof Maintenance
Solar Panels
Accumulated dirt and soiling can affect the performance of the solar panels. Panels should be cleaned as necessary
to prevent this. Sealants around solar panel mounts and cables should be checked every 6 months to ensure they are
in good condition.
Winegard Sensar III Antenna
The mechanism for your Winegard antenna should be lubricated according to the manufacturers specified schedule.