Chapter 4
USE AND MAINTENANCE MANUAL
page
15
Installation and assembly
Technical dept. - All rights reserved by MCZ GROUP S.p.A. - Reproduction
prohibited
4. INSTALLATION AND ASSEMBLY
IMPORTANT!
The stove must be installed and connected to the flue
pipe by a specialised technician or by competent
staff so that all local or national regulations are
complied with and in all cases in accordance with the
provisions of standard UNI 10683 REV.
When you unwrap the stove and related frame,
make sure that
every part is in perfect
working order or check for any damage
due to transport.
If the stove is installed in a difficult to access place,
the weight can be lightened by removing the internal elements making
up the combustion chamber.
We recommend you reposition each
element correctly.
4.1.
PREPARATION AND UNPACKING
The Veld stove is delivered with three different packagings:
one contains the stove (figure 1)
one contains the ceramic parts (sides and fronts) figure 2 (the
box containing the ceramic parts will be placed on top of the
structure packaging)
Open the package, remove the packaging straps and the two brackets
(fig. 3) that secure the stove to the pallet.
Remove the two screws (A) from the bracket at the bottom right and
left of the stove.
Then remove the other three screws (B) securing the bracket to the
pallet and position the stove in the chosen location, making sure it
complies with the applicable provisions.
Only reposition the sides onto the stove after it has been
positioned in the right place.
A
A
B
B
B
BRACKE
Figure 1 - Veld stove packaging
Figure 2 - Veld stove ceramic
packaging
Figure 3 -
Removing the packaging
screws (Veld stove)
