MCZ LINEA Comfort Air, Installation Manual

Page: 83 / 112

35
26-RECIPES
Technical Dept. - All rights reserved - Reproduction prohibited
Modifying the pellet recipe and air recipe
This function is for adapting the stove to the type of pellet in use. In fact, since there are many types of pellets on the market, operation of
the stove varies significantly depending on the good or poor quality of the fuel.
The amount of pellets in the brazier can be increased or reduced:
• If the pellets tend to jam in the brazier due to an excess of fuel
• If the flame is increasingly higher even at low power values
• If the flame is always low
To edit the PELLET recipe, select one of the values available.
Available values:
- 3 = Reduction of pellet loading by 20% at all power values
- 2 = Reduction of pellet loading by 13% at all power values
- 1 = Reduction of pellet loading by 6% at all power values
0 = no change
1 = Increase of pellet loading by 3% at all power values
2 = Increase of pellet loading by 6% at all power values
3 = Increase of pellet loading by 10% at all power values
To edit the
AIR
recipe, select one of the values available.
Available values:
-- 2 = - 10%
- 1 = - 5%
0 = (default value)
1 = + 5%
2 = + 10%
This function is used to adjust combustion air if the flame is too high
or too low.