
EN
INSTALLATION OF WALL MOUNTED CONTROL PANEL CODE 4018034
This panel is compatible with any MAESTRO appliance.
MECHANICAL INSTALLATION
Install the metal box containing the MAESTRO panel on the wall near the appliance using Ø 6 mm“Fischer” fasteners.
Bring the electric wiring of the panel from the appliance into the recessed box.
ELECTRICAL INSTALLATION
Connect the RJ11 plug (similar to a twisted pair cable) to the specific connector on the board (see picture) and on the display.
House the cable flush on the wall or appliance so that it is not inadvertently pulled
Snap the display onto the electric box, using the specific slots.
PLEASE NOTE Inside the box leave a “coil” of cable so that the display can be taken out for updating.
Technical Dept. - All rights reserved - Reproduction is prohibited
4-INSTALLATION
35