
x
x
x
y
y
x
y
EN
INSTALLATION OF CONTROL PANELS “LIFT” CODE 4018002 AND “LIFT” FOR ROUND STOVES CODE 4018009
The LIFT control panel with vertical push-pull extraction was designed to be installed on the back of the appliance configured accordingly.
Its concealed movement allows the panel to be recovered so that it remains invisible when not used, allowing the aesthetics of the product
to remain unchanged.
MECHANICAL INSTALLATION
Install the panel as shown in the figure, applying the 4 supplied screws “x” on the back of the product.
It is recommended to pre-assemble the 4 screws “x” on the back of the product without tightening them, insert the panel support making
use of the specific slots “y”, fasten the panel with a quick downward movement and then tighten the screws “x” from outside the product.
LIFT CONTROL PANEL CODE 4018002
ROUND LIFT CONTROL PANEL
CODE 4018009
4-INSTALLATION
30