background image

 

                                                      www.mcohome.com                                        User Manual

 

MCOHome Technology Co., Ltd     

     

 

1

 

Water /Electrical Heating Thermostat 

MH7H-WH / MH7H-EH 

 

                                                              Introduction                                                       

MCOHome  Water  /  Electrical  Heating  Thermostat  is  a  Z-Wave  Plus  enabled  device  for 

indoor  temperature  control.  MH7H-WH  is  mainly  applied  to  control  wall  mounted  boiler,  water 

valve/pump  etc.  ,  while  MH7H-EH  is  for  electrical  heating  system.  The  device  is  of  high 

reliability  and  practicability,  which  can  be  included  and  operated  in  any  Z-Wave  network  with 

other  Z-Wave  certified  devices  from  any  other  manufacturers.  All  non-battery  operated  nodes 

within the network will act as repeaters regardless of vendor to increase reliability of the network.   

 

Features

 

 

Capacitive touch buttons   

 

Tempered glass panel, PC alloy enclosure 

 

Precise temperature calibration function 

 

Attractive appearance 

 

Clear display, easy to operate   

                                                              Specification                                                       

 

Power Supply

AC85-260V, 50/60HZ 

 

Output: MH7H-WH ≤5A ; MH7H-EH≤ 16A 

 

Self Consumption

≤1W 

 

External Temp. Sensor(optional): NTC    R25

=15K

Ω

    B25

/50

=3550K   

 

Working Environment

0-50

;    0-90% RH

Non-condensation) 

 

Temperature Setting

5-37 

(41-99℉)

Adjustable

 

 

Dimension

86* 86*15mm   

 

Hole Pitch

60-61mm   

                                                               

  Safety Information   

                                                   

To protect yourself and others from danger and to protect the device from damage, please read the 

safety information before using it. 

Important! 

 

 

A qualified electrician with the understanding of wiring diagrams and knowledge of electrical 

safety should complete installation following the instructions. 

 

Before installation, please confirm the real voltage complying with the device’s specification. 

Cut off any power supply to secure the safety of people and device.   

 

During installation, protect the device from any physical damage by dropping or bumping. If 

happens, please contact the supplier for maintenance. 

 

Keep  the  device  away  from  acid-base  and  other  corrosive  solids,  liquids,  gases,  to  avoid 

damage.   

 

Avoid overexertion during operation, to protect device from mechanical damage. 

 

Read all instructions and documentation and save for future reference. 

Summary of Contents for MH7H-WH









Reviews: