11
COMMAND_CLASS_THERMOSTAT_FAN_STATE,
COMMAND_CLASS_BASIC,
COMMAND_CLASS_TIME,
COMMAND_CLASS_TIME_PARAMETERS,
COMMAND_CLASS_CONFIGURATION,
COMMAND_CLASS_TRANSPORT_SERVICE_V2,
COMMAND_CLASS_SECURITY_2,
COMMAND_CLASS_SUPERVISION
，
COMMAND_CLASS_FIRMWARE_UPDATE_MD
Association Group
AG
identifier
Max
Node
ID
Command Classes
Trigger situation
0x01
1
COMMAND_CLASS_SENSOR_MULTILEVEL_V5,
SENSOR_MULTILEVEL_REPORT_V5
When the parameter 2 set to 1,
detected temperature change
is greater than the value set by
parameter 3.
When the parameter 2 set to 2,
when the report is the interval
time is greater than the value
set by parameter 4.
When the parameter 2 set to 3,
the detected temperature
change is greater than the
value set by parameter 3 or
the reported time is greater
than the value set by
parameter 4.
COMMAND_CLASS_THERMOSTAT_MODE_V2,
THERMOSTAT_MODE_REPORT
Thermostat mode changes
COMMAND_CLASS_THERMOSTAT_OPERATING_STATE,
THERMOSTAT_OPERATING_STATE_REPORT
Thermostat status changes
COMMAND_CLASS_THERMOSTAT_SETPOINT_V2,
THERMOSTAT_SETPOINT_REPORT_V2
Set point value changes
COMMAND_CLASS_THERMOSTAT_FAN_MODE,
THERMOSTAT_FAN_MODE_REPORT
Fan mode changes
COMMAND_CLASS_THERMOSTAT_FAN_STATE,
THERMOSTAT_FAN_STATE_REPORT
Fan status changes
COMMAND_CLASS_DEVICE_RESET_LOCALLY,
DEVICE_RESET_LOCALLY_NOTIFICATION
Restore the factory setting
Z-Wave Parameter Setting
Number
Function
Size
Description
Default
Possible
Values
1
Automatic Temp Scale
Reporting
1
0: Celsius
1: Fahrenheit
2: Follow the main page display
2
0-2
2
Automatic Temperature
Value Reporting
1
0: OFF
1: Only report the difference, the
current temperature and the last
temperature of a certain value to
trigger the reporting
2: Regular reporting only
3: Difference rep Interval
3
0-3
