Page 25
Inhibiting a Channel
To Inhibit a Channel when Scanning:
1
. The scan program is now running.
The
Scan ALL run
screen is displayed.
Press
Stop
.
2
. The screen now displays the new scan
status:
Inhibit chXX
, where XX was the channel
when
Stop
was pressed. Example: Ch25.
Press
Select
.
The scan program is now running again,
But channel 25 is now temporarily deleted
from the list of channels to be scanned, and
the radio will skip over channel 25 when
selecting channels during the scan process.
Channel inhibition can be applied to additional channels, and is performed exactly
as described in steps
1
and
2
above.
To restore the original 'Scan All' state (all channels scanned) press the
Back
key
then the
Select
key. Scanning is then resumed for all channels.
Running a Scan Program (1-9)
To Run a Scan Program (Scan Program 1 to Scan Program 9):
1
. In standby screen, press
Menu
, then scroll
to
Channel scanning
and press
Select
.
2
. Scroll to
Run scan program
and press
Select
.
3
. Display shows
Scan:
ALL
.
Scroll to
Scan:
01
(or to the Scan Program of
your choice. When the desired Scan Program
is displayed press
Select
to start the Scan
Program.
[See also also ‘Full Telephony Operations: Creating and Editing a Scan Program’
page 24.]
Scan:ALL stopped
Inhibit ch25
Select
Run
Scan:ALL run
Stop
24
Back
Scan:ALL run
Stop
26
Back
Channel scanning
Run scan program
Select
Back
Run scan program
Scan:
01
Select
Back
Summary of Contents for F1 DSC
