mcmurdo F1 DSC Page 25 Operation Manual Download

Page: 25 / 74

Page 15

Basic DSC Operations

All DSC communication is on Channel 70. The radio maintains a continuous watch
on this channel for incoming messages, which are immediately reported. This
monitoring also allows the system to transmit only when the channel is free.

Receiving an Individual DSC Call

When the radio receives an individual DSC message an alarm will sound, and the
message

Individual Call

is displayed.

If the call type is 'Distress' or 'Urgency' the
alarm ('notify beep') will sound repeatedly
every second. This screen will remain until
you

Read

the message or

Exit

To read the message:

. Press

Read

action key (or any key).

Alarm tone is cancelled.

. Press Read

key again to go to Read mode.

. The

Read

mode screen is displayed,

and the message details are now shown.
To acknowledge the message press

Select

. You now have a choice:

Transmit Acknowledge?

•

Yes

(default)

•

Use the scroll keys to change the option
to acknowledge the received message.

. Press

Select

to transmit a DSC

acknowledgement. A DSC Acknowledge
message is transmitted and the display briefly
shows

Acknowledge sent

and the MMSI of

the called station. The radio now switches to
the caller proposed channel ready for
communication. Press

Reset

to restore the

original channel, if desired.

Individual Call

Read

Exi

Individual: Safety
15 Jan 02 UTC:07:43

From stn: 987654321

Select

Back

Transmit acknowledge

Yes



Select

Back

[Press

Read

]

[Press

Read

]

;Ò

56'N at:08:41

001

34'E UTC

Reset

Pos

NOTE:

Normal practice is to acknowledge a

received DSC message, especially Distress or
Urgency messages.

Acknowledge sent

Called stn:987654321

NOTE:

If the call type is ‘Safety’ or

‘Routine’ the alarm will sound twice only.
If the message is not read within 1 minute
the radio will return to standby mode.

Summary of Contents for F1 DSC











































































Search results

Summary of Contents for F1 DSC

Reviews:

Related manuals for F1 DSC

Brands by name

Popular brands

mcmurdo F1 DSC, Operation Manual

Search results

Summary of Contents for F1 DSC

Reviews:

Related manuals for F1 DSC

Brands by name

Popular brands