Page 6
TIMED OUTPUT
1.
Enter Programming Mode
See ENTERING PROGRAMMNG MODE (page 3).
2.
Press button 3 repeatedly until the channels lights
indicate the output channel you wish to program.
3.
Press button 2 repeatedly until the feature lights are
on as shown.
Press button 1 will swap the feature light(s)
between flashing and not flashing.
Flashing
Not Flashing
4.
Timed Output
Off.
Timed Output On.
Default 0.5 seconds. See
Timed Output Programming.
5.
Press and hold button 2 on the remote control until
the lights start scrolling
The output has now been programmed.
TIMED OUTPUT PROGRAMMING
1.
Enter Programming Mode
See ENTERING PROGRAMMNG MODE (page 3).
2.
Press button 3 repeatedly until the channels lights
indicate the output channel you wish to program.
3.
Press button 2 repeatedly until the feature lights are
on as shown.
4.
Press button 1 repeatedly (either once or twice) to
set the feature light(s) to flashing.
5.
To begin recording the desired output time press
button 1. The feature light(s) will stop flashing to
indicate recording.
6.
Once the desired output time has elapsed press
button 2 to stop recording. The feature lights will
appear as shown to indicate the recording has been
confirmed.
)
)
)
)
)
)
)
)
)
