Page 3
Programming
During normal operation the display lights on the unit are scrolling from right to left. When
the display lights are not scrolling, this indicates the unit is in programming mode.
MANUAL SYMBOLOGY
Light is
OFF
Light is
ON
and not flashing
Light is
FLASHING
Lights are
SCROLLING
When looking at the receiver with the terminal
strip at the bottom:
The group of 3 LED Lights on the left are the
FEATURE
lights.
The group of 4 LED Lights on the right are the
CHANNEL
Lights .
ENTERING PROGRAMMING MODE
1.
Disconnect 12VDC power from the unit.
2.
Press and hold button 2 on the remote control.
3.
Reconnect 12VDC Power to the unit.
4.
Release button 2 once the display lights stop
scrolling. You are now in programming mode.
)
FEATURE
CHANNEL
