Test Functions
Notes:
Notes:
Notes:
Notes:
Notes:
1.
Test your system regularly and this will keep you familiar with the system
and confident in the systems operation.
2.
Maximum testing time is 10 minutes.
3.
All Areas must be in the OFF mode before entering test mode.
4.
Test modes described below.
Test 1
Test 1
Test 1
Test 1
Test 1
-
Walk test
- Beeper and section light operates. This test
enables the user to walk around and activate sensors and
check correct operation of sensors.
Test 2
Test 2
Test 2
Test 2
Test 2
-
Siren test
- Siren sounds for 3 seconds.
Test 3
Test 3
Test 3
Test 3
Test 3
-
Strobe test - Strobe operates unitl next key press.
Test 4
Test 4
Test 4
Test 4
Test 4
-
Test all lights and beeper
operates until the next key is pressed
-
used to check operation of lights and beeper.
Test 5
Test 5
Test 5
Test 5
Test 5
-
Recall Last Alarm
- last alarm flashes until next key press.
Test 71
Test 71
Test 71
Test 71
Test 71
-
Print a report
of the last 150 events in the Event log.
Test 70
Test 70
Test 70
Test 70
Test 70
-
Print a report
of the all the events in the Event log (1000).
Test mode is exited. Abort print report by pressing any key.
Test 9
Test 9
Test 9
Test 9
Test 9
-
(Dialler Only) Sends a
Test Message
to the Central station.
Test mode is exited.
Key Sequence
Operation
1 2 3 4
Test
Example shows a User Code 1 2 3 4
being
used to enter test mode.
1
Test 1 started - walk test
2
Test 2 started - siren test
Off
Exit test mode.
page 11
www.msealarms.com.au