![background image](http://html1.mh-extra.com/html/rako/wcm-071/wcm-071_instruction-manual_3514140001.webp)
WCM-071 Instruction Manual
For programming information:
Wired system Programming Guide
For general overview:
What is the WCM-071?
The WCM-071 wired keypad is seven button keypad for use with
the wired system. It is designed to operate up to 8 separate
curtains/blinds in a single room before any custom programming is
added.
WCMs require a RAK-LINK to operate as part of the system.
WCMs (as part of the wired network generally) can be wired in two
ways:
“Daisy Chain” configuration -
A single run of keypads runs from
the RAK-LINK and to an end point. It is still usually advisable to run
a return leg back to
the RAK-LINK as a spare.
“STAR” configuration -
Cables are all run back to a central point: a RAK-STAR usually
located with the RAK-LINK. Each cable can be from a single keypad or a leg of keypads.
Installation Note:
The WCM comes in two sections “Front” and “Back” they are referred to as such in the following
installation guide. The “Back” section is just a connection board for the CAT5/6 cable. The “Front”
section contains all memory and programming.
WCM-071
Manual Version 2.0.2