MClimate Maya, User Manual

Page: 14 / 18

Battery Problem. The beep sounds
for about 10 seconds.
1. The battery is heated to high temperature
due to recharge; 2. The battery is incorrectly
installed, it is necessary to install it again; 3.
The battery is damaged.
Flashing light with a beep for about
10 seconds.
Check the power cord (16.5V).
Lights are on as well as the sound
signal.
The appliance is fully charged but not
separated from the power cord.
Flashing light and a beep that lasts
for about 10 seconds.
The battery is totally depleted.
Unsatisfactory cleaning 1. Check whether the brushes are not too dirty and whether the fan is dirty. Clean
brushes and fan;
2. Clean the waste container and the filter.
The appliance stops
working suddenly
1. Check for error number 1;
2. Check if you have not activated the 20-minute cleaning mode.
The remote control does
not work
1. Check that the batteries on the remote control are properly installed or
depleted;
2. Check that the appliance is switched on;
3. Ensure that you have direct visibility and that the distance between the remote
control and the unit is less than 10 meters;
4. After 30 minutes of inactivity, press AUTO or 20M (located on the appliance)
before using the remote control again. If you use the remote control first, Maya’s
activation will fail.
The appliance fails to find
the charging station
1. Check the power cord;
2. Check whether Maya can be switched on / off;
3. Check if the adapter is properly connected to the power supply and that the
LED light is activated;
4. If the battery is completely exhausted, the appliance is unable to find the power
station;
5. Check for items located near the charging station;
6. If you have not used Maya for a longer period of time, charge for about 1 hour.
Stop the power for about 1 minute and connect Maya back to the power supply
while it is fully charged.
13
Other mistakes
Errors Solution