MClimate Maya, User Manual

Page: 13 / 18

Center wheel indicator flashes. The
beep sounds for about 10 seconds.
Check the center wheel and remove any
dirt.
Right brush indicator flashes. The
beep sounds for about 10 seconds.
Remove brushes and remove any dirt.
Left wheel indicator flashes. The
beep sounds for about 10 seconds.
Check whether the left wheel is locked. If
necessary, remove the wheel cover and
clean it.
Waste container indicator flashes.
The beep sounds for about 10
seconds.
1. Check that the container is properly
positioned; 2. Check the dust mouth and
clean it; 3. Check whether the container is full
and clean it; 4. Clean the filter.
Right wheel indicator flashes. The
beep sounds for about 10 seconds.
Check if the right wheel is locked. If
necessary, remove the wheel cover and
clean it.
Fan indicator flashes. The beep
sounds for about 10 seconds.
Check the fan next to the dust mouth.
Ground sensor indicator flashes.
The beep sounds for about 10
seconds.
1. Check the ground sensor and clean it;
2. If the flooring is black, it would activate
the sensor;
3. There is a ground sensor problem.
Three flashing indicators. The beep
sounds for about 10 seconds.
The appliance is trapped.
12
24-hour programming
Error check
Indicator Error Solution
Press the restart button and you will hear the music signal. In the meantime, by pressing the pause button, you
will see two red lights flashing at the same time. This is a sign that the 24-hour feature is activated. Maya will clean each
day at the time the feature was activated beforehand. For example, if you make a timer at 9.00 in the morning, the next
day, Maya will clean up at 9.00. If you want to disable the program, press button again.
1
If you are using the mobile application, you need to press button to activate 24-hour programming. Press button
to deactivate it.
2