PBX
gateway
QIG Page 15 G-6000G-SMM
Types of Networks
Introduction
Which type
of Network
Device do
y7ou have?
This section of the manual provides the necessary information to configure the
PBXgateway using the Management Interface (MI). The units are programmed at the
factory with “default” settings providing basic parameters to accommodate most network
environments.
Before beginning the configuration process, it is necessary to identify which type of
network device is connected to the PBXgateway. Once you know the type of connection,
Table 6, below, will direct you to the appropriate checklist that should be used for
configuration.
To configure the PBXgateway with …..
See page…..
a Synchronous-Serial device – V.35,
RS-232, RS-530 via WAN Port
(RVP_Direct)
16
an IP device – via Ethernet port
(RVP_IP)
17
Table 6. Network devices