8
How to Connect a
Two Way System
How to Connect a Two Way System
Left MN410,
MN510, or
MN610
Right MN410,
MN510, or
MN610
McIntosh Stereo
Power Amplifier
Left MS440,
MS540, or MS640
Right MS440,
MS540, or MS640
Right MS10
Left MS10
+
-
+
-
Figure 9
BiAmp Jumpers
- 6 dB Jumper
1. Press the connector ends of the supplied Woofer/
Midrange Red/Black cables onto the matching Woofer/
Midrange connecting lugs. Connect the Tweeters in a
similar manner.
2. Attach the tinned ends of the two Red/Black Woofer/
Midrange cables to the Crossover Network WOOFER
OUTPUT terminals. The Black wire connects to a MI-
NUS (-) terminal and the Red wire to a PLUS (+) ter-
minal.
3. Attach the tinned ends of the two Red/Black Tweeter
cables to the Crossover Network TWEETER terminals.
The Black wire connects to a MINUS (-) terminal and
the Red wire to a PLUS (+) terminal.
4. Connect the MINUS (-) OUTPUTS of a McIntosh
Power Amplifier to the MINUS SINGLE AMP
WOOFER INPUT Crossover Network terminals and
the PLUS (+) OUTPUTS to the PLUS (+) SINGLE
AMP TWEETER Crossover Network terminals.
5. An optional modification to the Crossover Network
produces a 6dB
reduction in
Tweeter level.
When facing the
terminal side of the
crossover, cut the
wire loop located
on the right side of
the crossover. Re-
fer to Figure 9.
