MCH M1000i, User Manual, Page: 18 / 32

6.2) AC applications
6.2.1) Start engine and make sure the output indicator
light (green) is on.
6.2.
2) Confirm
all electrical appliances are switched
off,
and
connect the appliance plug
s
to the
generator receptacle.
NOTE
To obtain the best working and longest working
life of the generator, a new generator is
supposed to run for 20 hours at 50%
rated load.
■
OVERLOAD
INDICATOR
LIGHT(RED)
PLUG
NOTE
Confirm all electrical appliances are in good
working condition before connecting them to
the generator. If an electrical appliance
becomes abnormal, sluggish, or stops
suddenly, shut off the generator engine
immediately, and disconnect the appliance.
■
6.3) AC Pilot and Overload Indicator
In normal operating, indicator light
(green) will remain on.
If the generator is overload (over 0.9 kVA), or the
connected appliance
is short-circuit, the
indicator light (green) is off
,
and overload
indicator light (red) is on. The AC power will be
switched off, but engine is
still running.
AC Pilot
AC Pilot
circuit and
reset the protector after a few minutes.
protector, remove load firstly, then
DC CIRCUIT PROTECTOR
ON OFF
<<18>>
AC PILOT
INDICATOR
LIGHT (GREEN)