background image

彩色印刷 

128g

铜版纸,绿色边框为刀模线,中间红线为折页线

Installation Instructions

Interior Assembly Diagram

screw hole 

rubber plug

battery cover

reversing screw

Exterior Assembly Diagram

spindle base

reversing screw

keypad

card region

handle

emergency 
mechanical key

emergency TYPE-C 

power interface

I    Make sure the "B" towards up to the triangle mark point.

 

Reverse the handle direction

       
     
       

1. The smart door lock is suitable for left hand and right hand opening door. As default, it’s 
set as right hand, if need to reverse the handle direction to left, as showed in figure, loosen 
the reversing screw ‘C’, rotate the handle up 180 degrees, then tighten the screw ‘C’ back. 
Turn the direction of ‘B’ towards up, reverse completely. 

2. Reverse the lock handle indoor, loosen the reversing screw D, rotate the handle up 
180 degrees, then tighten the screw ‘D’ back, no need to change the spindle base.

C

C

C

 

As shown in figure, tighten the two connection screw studs on the external threads of 

         the exterior panel.

connecting wire

fixing screw

lockcase

exterior assembly

long spindle

fixing screw

interior assembly

short spindle

rear mounting plate

battery cover

fixing screw

screw hole rubber plug

fixing screw

reset button

  

Installation steps

         1. First install and tighten the lockcase according to the door opening direction, and install 
         the strike plate on the door frame. 
         2. Install the exterior assembly, the short spindle is installed into the front panel, then 
         please pay attention to the connection wire, pull it out from behind the door and sort it 
        out, then install the rear mounting plate behind the door, place the two screws into halfway 
         but don’t tighten them yet. 
         3. Adjust the spindle and the hole of the rear mounting plate, then tighten the two screws. 
         4. Install the interior assembly, the long spindle is installed into the rear panel, then check 
         whether the spindle spring has been installed in the spindle hole, then connect the wires 
         of the front and rear panel.
         5. Tighten the four fixing screws, and install the screw hole rubber plug. 

  

 Back Size:427.5*210  Single page size:142.5*210    128g

D

D

D

Summary of Contents for MLWINDSOR












Reviews: