RCF spa
M 18 Digital Mixer User’s Manual
36
The Reboot button is intended for advanced applications, and should be avoided in normal usage.
GLOBAL
This page contains several settings affecting the operating mode of the mixer.
The 48V Phantom Enable section allows the activation of 48V phantom power for microphone inputs in
groups of 4, using Phantom 1-4 and Phantom 5-8 switches.
The Phones Mode section sets the mode of the headphone output, allowing the selection between PFL (on
FADERS INPUT page) and Personal Mix.
The Input Stereo Links section allows you to link in stereo an odd channel with the next even channel. After
the link, all settings from the odd channel will be copied to the even channel, and in the bottom row the
numbers of paired inputs will show up (e. g. 03-04) below a single fader with stereo VU meter. The Link
option is available for all inputs (1 to 18) plus the stereo player from USB flash drive. By default the player is
linked in stereo.
The Footswitch section controls allows you to determine the footswitch operation; Mode allows you to
choose between LATCHING or MOMENTARY N.C. footswitch contact. Then there are SW1 assign (TIP) and
SW2 assign (RING) drop-down menus listing all the parameters to be controlled.
The Output Routing section has drop-down menus to choose the source for several physical output:
-
AUX output between its relevant AUX, MAIN or PHONES busses
-
PHONES output between MAIN and PHONES busses
MIDI