RCF spa
M 18 Digital Mixer User’s Manual
21
By tapping the AMP stomp box, a new
page shows up, with all the relevant
parameters on a single view for
maximum editing efficiency.
Each Head AMP simulation has a
preferred Cabinet combination, and
every time you select a Head AMP, the
matching Cabinet will show up. Then,
you can vary the Cabinet model and
experiment
with
unusual
combinations.
Each Head AMP has up to 6
parameters that accurately model the
controls available on the original
amplifiers.
The ON/OFF rocker switch represents the BYPASS switch, and has same function as the switch on the
stomp box view.
As visible on the left, most Cabinets have similar names to the Head AMPs.
The last four Head AMPs and Cabinets are dedicated to
bass guitar, covering a wide range of resulting timbre.
In addition to the Overloud
TM
models, two well-known
MarkBass
TM
models have been included.
You can also selet the microphone type which has
been used when modeling the AMP (see below):
RadioElectro 16 (large-diaphragm cardioid dynamic)
American 57 (small-diaphragm cardioid dynamic)
GermanFet 87 (large-diaphragm cardioid condenser)
The choice for microphone position is
between:
Near, on-axis
Near, off-axis
Far (1 metre from cabinet)