Maintenance
5 - 5
Facer and Blades
The facers are packed with a high temperature grease at assembly. The
facer does not require repacking of grease.
Inspect the facer blades for damage and sharpness. If dullness or damage
appears on one section of the blade, installing the blade on the opposite
side of the blade holder will normally position a sharp edge in the facing
zone. Chipped or dull blades must be replaced.
NOTICE:
Never extend the blade beyond the inner or outer
circumference of the facer.
TX02473-3-29-05
Facer Guides
To minimize friction on the guide rods, keep the guides clean using a clean
dry cloth to wipe away debris.
TX02480-3-30-05
PH0
1860-7-2
5-00
PH0
1860-7-2
5-00
Summary of Contents for 2CU
Page 1: ...Manual 201001 Revision F 09 20 2CU Fusion Machine Operator s Manual Original Language English...
Page 32: ......
Page 34: ......
