Microwave Oven
4. Installation
Unpacking Oven
•
•
•
•
•
•
•
•
•
•
•
Visually Inspect equipment for damage, such as dents in door, damaged cord, plug, or dents
inside oven cavity.
Report any dents or breakage to source of purchase immediately. Do not attempt to use
oven if damaged.
Do not attempt to use oven if damaged
.
Remove all materials from oven interior.
If oven has been stored in extremely cold area, wait a few hours before connecting power.
Equipment Placement
Allow at least 17.8 centimetres of clearance around top and sides of equipment. Proper air
flow around equipment cools electrical components. With restricted air flow, oven may not
operate properly and life of electrical parts is reduced.
Allow at least 6.5 centimetres between back of oven and rear wall.
Do not install equipment next to or above source of heat, such as oven or fryer. This could
cause microwave oven to operate improperly and could shorten life of electrical parts.
Install oven on a level countertop surface.
Do not block or obstruct oven filter.
Allow access for cleaning.
Power outlet should be located so that the plug is accessible when the oven is in place.
©
2002 McDonald’s Corporation
©McDonald’s Australia Limited
Version
1.0:
December 2003
This manual is for the exclusive use of licensees and employees of McDonald’s Systems Inc
Page 6 of 17
