Microwave Oven
Mid-Cycle Cooking Pause
The cooking pause is a feature unique to this series of microwaves. This
pause enables extra ingredients
to be added, cooking progress to be checked, or for food to sit a necessary
amount of time between cooking time or power settings. To utilize Cooking
Pause, follow programming sequences for programmable pads.
7. Operations
Note:
Oven is pre-set from the factory for the cooking process to be
commenced
with
a
single
button.
Manual Time Entry
To cook food using a specific entered time and power level.
1. Open oven door and place food in oven. Close door.
•
READY
displays. Fan will turn on.
•
ITEM
flashes when keypad accepts entries.
2. Press TIME ENTRY pad.
•
00:00
displays.
•
STG
displays with current cooking stage.
•
If pad doesn’t work, open and close oven door and try again.
3. Enter cooking time by using the numbered pads.
4. Press POWER LEVEL pad to change power level is required.
•
COOK LEVEL
displays with the current power setting.
•
If power level is set too high
H
displays.
•
For a lower microwave power, press pads 1(for 10%) through 9 (for 90%).
5. If stage cooking is desired, press STAGE pad and repeat steps 2 through 4.
•
Up to 4 different stages can be programmed.
6. Press START pad.
•
Oven operates and time counts down.
•
POWER, COOK LEVEL
and cooking time displays.
7. At the end of the cooking cycle oven beeps and shuts off.
Done
displays.
Note:
If the door is opened during the heating process, Q-Ing energy ceases. Blower
continues to operate. Close the door and press the START button to continue oven
operation and countdown timing. If RESET is pressed once while the oven is operation,
Q-ing energy ceases, but countdown time remains on the display. Press START to
continue oven operation and countdown timing. If RESET is pressed twice, oven stops
and current programme cancels.
When the unit is plugged in or re-powered after the loss of electricity, it will take several seconds
before dashes and the menu indicator will display. Once displayed, unit is operational.
©
2002 McDonald’s Corporation
©McDonald’s Australia Limited
Version
1.0:
December 2003
This manual is for the exclusive use of licensees and employees of McDonald’s Systems Inc
Page 9 of 17
