9
CartCleaner UV
FUNCTIONING AND USE
Intended Use
The machine is designed and built to be used by ordinary persons (customers) and is
intended only for the sanitization of shopping carts and baskets, luggage trolleys other
equipment. With the introduction of the trolley in the proper compartment, the sanitizing cycle
starts automatically. The operations to be performed are described below and must be
performed in the presence of the operator (customer).
Mode of Use:
1 Make sure that the processing compartment is empty
2 Green light ON (machine ready)
3 Insert the trolley completely up, beyond the curtain.
4 Red light ON (the compartments is busy, shopping cart is inside)
5 The sanitizing cycle starts automatically (blue light ON)
6 Duration of sanitation cycle 15 seconds
7 End of cycle: flashing green light
8 Collect the cart
9 Green light steady ON: Machine ready for new cycle.
BREAKDOWN OR EMERGENCY
In the event of evident anomalies such as
the presence of smoke, a fire or broken lamps
,
immediately press
the Emergency button on the front of the machine, disconnect the
machine from the power supply
and call the staff and / or contact the service center.
MAINTENANCE
CartCleaner UV
needs only simple maintenance work.
Suggested interventions:
- Periodically check the operation of the lamps (every 3 months).
- Periodically check the operation of the differential switch by pressing the appropriate test button
(every 3 months)
-
Replace the lamps at the end of their life cycle after 5000 operating hours (every 5 years approx.)
-
To replace the bulbs, contact the electrician maintenance staff
-
Periodic cleaning of the machine: before carrying out this intervention, it is mandatory to
disconnect the machine from the power supply. Clean it with a soft cloth, with gentle cleanser,
then rinse and dry.
-
Inactivity: in case of a long inactivity the machine must be placed in safety, by disconnecting the
power supply. Storage must be appropriate for the place and times of storage:
-
Store the machine in a closed and dry area.
-
Protect it from shocks and stress.
-
Protect it from humidity and high temperature changes.
-
Avoid any contact with corrosive substances
