2
INTRODUCTION
The Robo-Forest and Robo-Mulcher machines are ultra-heavy-duty 1.3m, 1.6m & 1.9m
flailhead attachments for use on McConnel all-terrain remote control Robocut machines.
All models feature a hydraulic front hood and reinforced steel push bar to aid the feeding
of material into the machine.
Robo-Forest heads are equipped with a heavy-duty steel rotor armed with hard-wearing
tungsten carbide teeth. The rotor, which spins at 3000rpm, is capable of
‘tearing’ through a
wide range of wooded growth materials from saplings to tree stumps and can mulch down
materials up to 100mm thick.
The Robo-Mulcher head offers similar performance using heavy-duty swinging hammer
flails attached to a specially designed rotor that provides exceptional cutting momentum for
pounding overgrowth and debris into a fine mulch.
These machines are ideal tools for use in the forestry industry and/or for contractors
operating in dense overgrowth on difficult terrain or in areas where access is limited.
These machines should only be used to perform tasks for which they are designed; use of
the machines for any other function can be dangerous to persons and damaging to
components.
MACHINE IDENTIFICATION
Machines are fitted with an identification plate in the
location indicated here; this plate contains information
that can be used to identify your exact machine and
model.
Always quote details from this identification plate when
ordering replacement parts or when seeking service
information or advice.
Robo-Mulcher Head Robo-Forest Head
