McAlpine Hussmann VLL726BL, Installation And Maintenance Instructions Manual

Page: 10 / 33

Page
10
ADJUSTING FRONT GLASS (VLL726E ONLY)
IMPORTANT! Ensure the power to the cabinet has been disconnected before
commencing work.
Adjusting the rear posts will require the following tools:
• Cross head screwdriver (Philips) PH2
• Square drive screw driver S2
• Star drive keys
• Allen keys
• Adjustable wrench
Adjusting the rear posts.
1. Remove the screws on the rear work top. Taking care not to damage the
trace heating wires, unhook the front of the work top and roll the back
forward to lay the work top against the canopy arms.
Screws to remove are
along the rear edge and
into each arm at
the front