- 7 -
How to Lower/Raise the Brush/Pad
1.
To raise the brush pad, step down the pedal
2.
To lower the brush pad, slightly step on the Brush Lift
Pedal (12) to unlock it, and raise it up slowly.
How to Set the Solution Flow
Adjust the water flow based on the floor conditions. Turn the water adjust valve(14) up,
to enlarge the water flow, turn down the valve, reduce the water flow.
What to Do When You’re Operating the Machine
Vacuuming Up Solution
1.
Make sure the squeegee is in the down position.
2.
As the machine moves forward and solution is dispensed, the squeegee will vacuum it
up into the recovery tank.
3.
If necessary adjust squeegee pressure by the two turning knob in the behind of the
squeegee.
If solution is missed, reduce the amount of solution flow and pull the machine back over
the missed area. You can go forward or backward and pick up solution.
