Machine Specification
Model No.
D510S
Brush Width
20in
Squeegee Width
33.5
Solution Tank
12Gal
Recovery Tank
13Gal
Brush Rotation
175rpm
Efficiency
25824sq.ft/h
Voltage
24V
Vacuum Motor Power
0.73HP
Brush Motor Power
0.73HP
Weight
340lbs
Length x Width x Height
51*20*42
Note:
MC preserves rights to improve the technology without prior notice.
So, the machine may not match these manuals, figures completely.
Daily Operation and Maintenance
How to Install Batteries
Caution: Batteries are heavy.
Install (2) 12-volt batteries. New Batteries should be given a full
charge before first use. Limit use of new batteries during first 5
cycles.
1.
Make sure the recovery tank is empty then turn down
the recovery tank.
2.
Place batteries on the tray. Use the bracket to secure
them. Position them correctly.
3.
Connect all the cable terminals.
Caution: Make sure you connect RED (+) cable
terminals to positive (+) posts and BLACK (-) cable
terminals to negative (-) posts. Machine will not operate
if not connected properly. Failure to do so will result in
damage to batteries and possible explosion.
4.
Spray each post with a protective lubricant. Place
battery terminal protectors over all posts.
