Instructions for use
GLM KIT
28
4) We will now load the files inserted earlier
from the board on the VT.
Pressing the key:
•
UP
: you load the operating software
(file SL35_VT.hex); wait for the loading bar
to become completely yellow and the
coloured bars on the side of the display will
turn off.
•
DOWN:
you load the graphics file
(file GRAPH_35.NOR); wait for the loading
bar to become completely yellow and the
coloured bars on the side of the display will
turn off.
•
ENTER:
you load the Eeprom setting file
(file SL35_VT.eep); wait for the loading bar
to become completely yellow and the
coloured bars on the side of the display will
turn off.
Figure 24
CAUTION:
In the event of an error, a red message appears at the bottom of the screen. Contact
MC elettronica's assistance service.
5)
To take out the SD card, press again until you hear a “click”. The spring will
push it out.
Summary of Contents for GLM KIT
