Instructions for use
GLM KIT
19
5. User settings
Figure 14
1.
Working mode:
switching this parameter determines the calculation mode of
losses by time or by distance (speed sensor is required).
2.
Pulses/rev. fan:
allows you to set the number of pulses/rev relative to the fan
sensor. Set to OFF if the sensor is not present.
3.
Pulses/rev. hitter:
allows you to set the number of pulses/rev relative to the
destemmer paddle sensor. Set to OFF if the sensor is not present.
Pressing the DOWN key again displays the screen below.
1
2
3
Summary of Contents for GLM KIT
