MC Electronic DORADO MX3, Instructions For Use Manual, Page: 59 / 68

Instructions for use
Dorado MX3 kit
59
8. Alarms
The alarms are always displayed based on the priority of the message. They
are following by a modulated audible signal to get the operator’s attention
regarding the problem that is then displayed on the screen.
When an alarm is generated in the Dorado MX3 kit, it can be due to various
parameters that the system monitors during machine operation. The sensitivity,
duration and tolerance threshold are defined in the specific programming menus
described in paragraph 4.
The events that generate an alarm are listed below:

The operating mode set to “Counter” allows us to make sure that the
sowing distance and the seeding population correspond to the values the
operator wants. Instead, if set to “Passage”, the system verifies whether
the seed passes within a certain interval.

The Dorado MX kit allows you to indicate the non passage of the seed
from a set time data.
Additional alarms will be available in future implementations.