manualshive.com logo in svg

MC Electronic DORADO MX3, Instructions For Use Manual, Page: 2 / 68

Share
Download
MC Electronic DORADO MX3 Instructions For Use Manual Download Page 2

 

Instructions for use 

Dorado MX3 kit 

2 

 
 
 
 

 

 

This product meets the EMC standards as determined in the 

2004/108/EC directive and subsequent amendments and reference to the applied 

EN ISO 14982 standard 

 
 
 

Manufacturer 

: MC elettronica S.r.l. 

Address 

: Via E. Fermi, 450/486  

 Fiesso Umbertiano (ROVIGO) - ITALY 

  Tel. +39 0425 754713      Fax  +39 0425 741130 
  E-mail: [email protected] 
  Internet: 

www.mcelettronica.it

 

 

 

Manual code  

: 1611MX3-OEM-EN 

Issued 

: July 2017 

Edition 

: November 2018 

 
 
 

MC elettronica S.r.l.

 is not obliged to give notice of any further modifications of the 

product. 

The information given in this manual does not allow unauthorised personnel to 
tamper with the product in any way. 
The warranty on the equipment will no longer be valid if tampering should be 
detected. 

 
 
 

© Copyright MC elettronica  2018

 

 

 

Summary of Contents for DORADO MX3





































































Reviews:

No comments