MC Electronic DORADO MX3, Instructions For Use Manual, Page: 56 / 68

Instructions for use
Dorado MX3 kit
56
Figure 44
We will now load the files inserted earlier
in the board on the VT.
Press:
UP : you load the operating software (file
SL35_VT.hex); wait for the loading bar to
become completely yellow and the
coloured bars on the side of the display
will turn off.
DOWN: you load the graphics file (file
GRAPH_35.NOR); wait for the loading
bar to become completely yellow and the
coloured bars on the side of the display
will turn off.
ENTER : you load the Eeprom setting file
(file SL35_VT.eep); wait for the loading
bar to become completely yellow and the
coloured bars on the side of the display
will turn off.
ATTENTION:
In the event of an error, a red message appears at the bottom of the screen. Contact MC
elettronica’s assistance service.
5) To take out the SD card, press again until you hear a "click". The spring will
push it out.