MC Crypt LB 160, Operating Instructions Manual

Page: 31 / 76

31
b) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the controller.
This DMX starting address specifies the first DMX channel to which the effect light responds. The remaining control
channels come after this first DMX channel (DMX starting address).
The effect light requires up to 26 DMX channels depending on DMX operating mode.
Setting the DMX operating mode
• Push the button UP (6) or DOWN (7) until the desired DMX operating mode (DMX mode) is displayed (see over-view
and following tables).
Setting the DMX starting address
• Select the desired starting address 001-512 with the INC (8) and DEC (9) buttons.
The following tables provide information on the different DMX operating modes and the effects of the settings on the
individual DMX channels.
DMX operating mode 1 (2-channel DMX operation)
DMX channel DMX Value Function
1 000-011 Lights off
012-023 red
024-035 green
036-047 blue
048-059 yellow
060-071 purple
072-083 cyan
084-095 white
096-107 Programme 01
108-119 Programme 02
120-131 Programme 03
132-143 Programme 04
144-155 Programme 05
156-167 Programme 06
168-179 Programme 07
180-191 Programme 08
192-203 Programme 09
204-215 Programme 10
216-227 Programme 11
228-239 Programme 12
240-251 Programme 13
252-255 Sound-to-Light Mode
2 000-255 Effect speed or sensitivity in sound-to-light mode