MBW MK8-75, Operator'S Safety And Service Manual

Page: 42 / 68

42 of 68
Visual
inspection of the
feather edge
disc and its
possible
replacement
Monthly
Visually inspect the state of
wear of the feather edge disks.
If one or both the disks have
undergone a dilation, action is
needed to replace it/them (see
PAR. 6.2.3).
Machine
stopped/
Power
sources
disconnected
Gearboxes
In case of leaks
and at the time
of installation
.
In case of
breakage or
faults that
cannot be
resolved and
require
the
replacement
of
the
component,
REFER
TO
SKILLED
LABOR
(AUTHORIZE
D DEALER).
The gearboxes are sealed upon
assembly; if you notice oil leaks,
carefully find out their origin
because there may be leaks
from other sources.
If the leaks come from the
gearbox, contact our technical
service or a qualified technician.
Clean any oil leaks at the
bottom of the trowel.
!
CAUTION
IT IS FORBIDDEN TO
REPLACE THE GEAR
BOX. REFER TO THE
MANUFACTURER
OR
THE RESELLER
(SPECIALIZED
MAINTENANCE
TECHNICIAN).
For a possible change of the
lubricant due to leaks or for the
topping up operations, use
the
following types of lubricant:
GLYGOYLE 30 OIL
N.C.34039910
Machine
stopped/
Power
sources
disconnected
Check state of
blade wear and
perform
replacements if
necessary
Daily
Follow the procedures in PAR.
6.2.1 for replacement
Machine
stopped/
Power
sources
disconnected
Adjustment of
blade inclination
degree
It is
recommended
to periodically
perform the
adjustment of
the blade
inclination
degree
At the
bench turn
the
adjusting
screw and
adjust the
angle
of
blades.
The operation can be carried out
with the machine mounted with
long keys.
Machine
stopped/
Power
sources
disconnected
Unlocking of
blade holder
arms and cover
plate
If needed
Refer to the reseller
(authorised dealer)
Machine
stopped/
Power
sources
disconnected