MBTelehealth – Polycom VSX 5000/7000 User Guide
To use camera presets directly from the remote control while in a call:
1.
Press a number on the remote control quickly twice (similar to how you would
double-click your mouse).
2.
The camera will move to the preset position stored on that number.
To delete all presets:
1.
If a call is connected, press the
Near End Camera
button
to choose a
near-site video source.
2.
Press the
Preset
button
3.
Press the
Delete
button
to delete all presets.
You cannot delete just one preset. Instead, override an existing preset
with the new camera position
.
3.5 Placing and Receiving a Video Calls
3.5.1 Point to Point
To place a video call:
1.
Select
Directory
from the
Home Screen
or press the
Directory
button on the
remote control.
2.
Scroll down the list of contacts. Once you have found the site you want to
connect to, press the
Call – Hang Up
button
to place the call.
You can quickly skip to a specific site by using the corresponding number key on
the remote control. For example, if you are looking for Pine Falls, press #7 on
the remote to skip to the P section of the phone book.
To accept an incoming video call:
1.
Your videoconferencing system is set to
Auto-Answer
which means that if the
system is turned on, all calls will be answered unless you reject them
.
2.
If an incoming call notification appears while you are already in a call,
press the green
Call – Hang Up
button or the red
End Call
button (depending on
Page 8 of 14
your remote control) to reject the call.