MBRP 0130717, Assembly

Page: 5 / 5

9. Preassemble the
Passenger Side Assembly as in Step
6. Lift the assembly into position as before. Be sure to align
the
Crossmembers with the Passenger Side Assembly as
well. Some adjustment may be required to get everything to
line up and slide into position, this is why all fasteners have
been left loose. Secure the
Passenger Side Assembly to
the hardtop using the supplied 5/16”x1” Button Head
Screws and Washers . Secure the Crossmembers to the
Passenger Side Assembly with the supplied 5/16”x2.5”
Button Head Screws and Washers . as in Step 8. 2 people
will be required for this step as well. Refer to Figure 8.
10. Install the
Center Crossmember by choosing a location
and securing with the supplied Knobs and 5/16” Washers .
Refer to Figure 9.
11. Tighten all fasteners. Be careful to not over tighten,
damage to the finish may result.
Congratulations! You are finished. Thank you for purchasing an
MBRP Inc MBRP Inc MBRP Inc MBRP Inc
.
Product.
0130717 03/09
Page 4 of 4
Figure 8
Figure 9