19
The procedure for remote access code setup /
display is as follows:
1.
Press the [
FORWARD
] key for about 2
seconds and then release it to display the
remote access code. The code display / setup
will be a high digit first, then a middle digit,
and then a low digit.
2.
Press the [
FORWARD
] key or the [
REPEAT
] key to increase or decrease the digit.
3.
Press the [
ANS
] key to select the correct digit.
4.
If a keypress exceeds 8 seconds, the setup /
display procedure will be aborted.
Please note:
If the AC power fails and there is no battery
installed or the battery is low on power, the
remote access code will return to the factory
setting ”
159
”.
If you have left home, you can change the
remote access code as follows:
1.
Dial your telephone number from a touch
tone telephone.
2.
When the system answers, you must press
and hold [
*
] for 1 second to skip the OGM
play, a beep tone will be heard.
3.
Press the
security code
to enter the remote
control mode.
4.
Enter [
*6
] and then the new
security code
.
5.
If a valid code number is entered, the system
changes the remote access code.
REMOTE CONTROL
CHANGE YOUR
REMOTE ACCESS
CODE REMOTELY
CHANGE THE
REMOTE ACCESS
CODE