manualshive.com logo in svg

MBM PULSE 26 UNISEX, User Manual

Share
Download
MBM PULSE 26 UNISEX User Manual Download Page 29

PULSE

 USER MANUAL

p.29

8.3.2  Lubrication and chain tension control

It is important to periodically clean and lubricate the chain to avoid corrosion due to atmospheric agents.
1. Clean the entire length of the links with a rag.
2. Spray all the links with a special grease in spray for transmission chains.

CHAIN LUBRICATION Be extremely careful 

not to get the lubricant on the bicycle’s 

brakes or tires. This can lead to serious 

injuries!

DANGER

Check the correct tension of the chain by positioning the gearbox 
in the two different extreme positions allowed by the sprocket 
pack.

8.3 Monthly maintenance and checks

8.3.1  Washing and cleaning

Cleaning the pedal assisted bicycle is not only a matter of decorum, but also allows you to immediately detect any defect 
in it.
In order not to damage or compromise the functioning of the various components, especially the electrical parts, cleaning 
must be carried out taking certain precautions. It is absolutely forbidden to direct jets of pressurized water towards the 
electrical parts, the engine and the battery, for which washing with a sponge is recommended.
Before starting the pedal assisted bicycle, dry completely with low pressure compressed air and check that there is no 
residual moisture on the electrical components.

8.3.3  Checking the frame and bolts

The supporting frame of the pedal assisted bicycle and the welds must be free of visible defects such as: cracks, defor-
mations, incisions, corrosion, etc. Make sure that all the bolts on the pedal assist bike are tight.

Summary of Contents for PULSE 26 UNISEX




































Reviews:

No comments

Brands by name

Popular brands

Load more brands